Application fit
Catheter and balloon bonding process development where controlled rotation, X-axis travel, and laser focus adjustment are required.
New product landing page
CO2 laser bonder for catheter and balloon bonding.
A compact rotary laser bonding platform for catheter and balloon process development, designed around CO2 laser energy, programmable motion, adjustable focus, and repeatable process files.
Programmable process
Workflow parameters include ring speed, X-axis distance, X-axis speed, PWM duty, begin rings, end rings, and saved process files.
Dry run mode
DryRun allows the equipment to follow the process without enabling the laser, supporting setup checks before live processing.
Specification summary
Technical data from the supplied spec sheet.
Note for launch readiness: the one-page specification sheet lists 110V power, while the operation manual lists 220V/50Hz as a working environment requirement. Confirm target market electrical configuration before publishing final commercial claims.
| Laser power | 1 W |
|---|---|
| Wavelength | 10.6 um |
| Beam quality | M2 1.2 |
| Spot size | 0.5-1.5 mm |
| Duty modulation range | 0-100% |
| Laser output stability | +/-10% |
| Processable product diameter | 0.5-3 mm |
| Rotary center runout | +/-0.01 mm |
| Rotation speed | Up to 500 RPM |
| Rotary welding length | Up to 50 mm |
| Cooling | Water cooled |
| Power | 110V in spec sheet; manual lists 220V/50Hz environment requirement |
| System power | 400 W |
| Dimensions | 596 x 357 x 500 mm |
| Weight | 25 kg |
Software controls
- Laser frequency, duty, total laser time, laser travel distance, laser start, and laser stop controls.
- X-axis platform movement, Z-axis focus adjustment, and rotary axis manual controls.
- RunStart, RunStop, InitMc, OrgWorkPos, LoadFile, Save, and SaveAs workflow controls.
- External camera workflow using S-EYE2.0 and Teslong Camera selection.
Safety and environment
- High-power laser equipment requires appropriate laser safety training and protective eyewear.
- Keep the work area dry, grounded, ventilated, and clear of flammable materials.
- Manual lists operating environment temperature of 5-45 C and humidity of 10-95%.
- Movement parts require guarding and careful fixture setup before processing.